1,75mm rPET-G Resirkulert PET-G

1,75mm rPET-G Resirkulert PET-G

269,00 NOK

(inkl. mva.)

Ingen produktomtale

Materiale

PET-G

Diameter

1.75mm

Toleranse

± 0.05 mm

Oppvarmet byggeplate  

Nei, men 40-60ºC anbefales

Print temperatur

195 - 225°C

Filament vekt

1000g (1kg)

Filament lengde

335 m  +/- 1%

Spolestørrelse

200mm x 81mm

Spole hull diameter

56 mm

Vekt tom spole208g
Modell/varenr.: 171-0-RPET
Lagerstatus: Bestillingsvare med kort levering
stk.
ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable. 
ReForm rPET is based on exactly the same unique formulation as our HDglass filament range, but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PETG-based filament with significantly less environmental impact.
 

Unique features

  • 100% upcycled/recycled filament with retaining the unsurpassed printing properties of HDglass

  • Less environmental impact by quality controlling and re-using extrusion waste streams

  • Only residual waste streams of HDglass is being re-used, thus pure quality!

  • Sustainable packaging

  • ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools

  • ReForm filament is packaged in recycled carton boxes

  • Compatible for printing at high speed

  • Easy to print

  • Nearly warp-free and perfect inter-layer adhesion

  • Good first layer adhesion to a heated glass print bed and many other surfaces

General printing guidelines *

Nozzle size: ≥ 0.15mmLayer height: ≥ 0.1mmFlow rate: ± 110%
Print temp: ± 195 - 225° CPrint speed: HighRetraction: Yes ± 6mm
Heat bed: ± 65 - 75° CFan speed: 50-100%Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.27 g/cc50 gr coil1 Kg spool
Ø 1.75mm± 16.4m± 327m
Ø 2.85mm± 6.2m± 123m

Product export information

HS Code: 39169090Description: MonofilamentCountry of origin: the Netherlands

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC

  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Filamentstørrelse 1,75mm
Vanskelighetsgrad Enkel

Kommentarer 0


Produktets tagger

Det er ikke registrert noen tagger.

Mine tagger

Andre kunder har også kjøpt