2,85mm rPLA Resirkulert PLA

2,85mm rPLA Resirkulert PLA

229,00 NOK

(inkl. mva.)

Ingen produktomtale

Materiale

PLA

Diameter

1.75mm

Toleranse

± 0.05 mm

Oppvarmet byggeplate  

Nei, men 40-60ºC anbefales

Print temperatur

180 - 220°C

Filament vekt

1000g (1kg)

Filament lengde

335 m  +/- 1%

Spolestørrelse

200mm x 81mm

Spole hull diameter

56 mm

Vekt tom spole208g
Modell/varenr.: 112-0-RPLA
Lagerstatus: Ikke på lager
stk.
ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable. 
ReForm rPLA is based on exactly the same unique formulation as our EasyFil PLA range, but is made out of residual extrusion waste streams which are re-compounded and homogenized into a high-end and easy to print upcycled PLA filament with significant less environmental impact.
 

Unique features

  • 100% upcycled/recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA

  • Less environmental impact by quality controlling and re-using extrusion waste streams

  • Only residual waste streams of EasyFil PLA is being re-used, thus pure quality!

  • Sustainable packaging

  • ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools

  • ReForm filament is packaged in recycled carton boxes

  • Biodegradable

  • Very easy to print

  • Warp-free printing and no deformation after cooling

  • Improved flowing behaviour and inter-layer adhesion

  • Good first layer adhesion to several (un)heated print surfaces

General printing guidelines *

Nozzle size: ≥ 0.15mmLayer height: ≥ 0.1mmFlow rate: ± 100%
Print temp: ± 180 - 220° CPrint speed: MediumRetraction: Yes ± 5mm
Heat bed: ± 0 - 60° CFan speed: 50-100%Experience level: Beginner

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

Filament length

ρ: 1.24 g/cc50 gr coil1 Kg spool
Ø 1.75mm± 16.8m± 335m
Ø 2.85mm± 6.3m± 126m

Product export information

HS Code: 39169090Description: MonofilamentCountry of origin: the Netherlands

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC

  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Filamentstørrelse 2,85mm
Vanskelighetsgrad Enkel
Tittel Type Størrelse Last ned
MSDS---ReForm-rPLA---English.pdf PDF 673.53KB Last ned
ReForm-rPLA---TDS---Formfutura.pdf PDF 109.48KB Last ned

Kommentarer 0


Produktets tagger

Det er ikke registrert noen tagger.

Mine tagger