1,75mm PLA VALUEPACK 4x500g

1,75mm PLA VALUEPACK 4x500g

439,20 NOK 549,00 NOK

(inkl. mva.)

Ingen produktomtale
Skriv produktomtale - Se produktomtale
± 0.02 mm
Oppvarmet byggeplate  
Nei, men 40-60ºC anbefales
Print temperatur
185 - 220°C
Filament vekt
4x500g (2000g)
Filament lengde
4x170 m  +/- 1%
Vekt tom spole122g
Modell/varenr.: 111-0-CVPL
Lagerstatus: På Lager

Valuepack med 4 x 500g EasyPrint PLA 

Farger:Hvit, Svart, Rød, Blå

Gir det muligheten til å få flere farger til rådighet for en bedre pris!

Passer til Flashforge maskiner, og inkluderer egen adapter


EasyPrint PLA is our latest PLA and is made from 100% virgin PLA pellets. PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice shiny surface. PLA is perfect for detailed prints.

Polylactic acid (PLA) is a bio-degradable polymer that is produced from starch, which can be fermented from crops such as corn.

EasyPrint PLA feels a bit softer to the touch than regular PLA, it´s also more pliable which makes it perfect for all printers including printers with a Bowden set up.

Due to the very low shrinkage EasyPrint PLA is very easy to use in all FDM/FFF printers. The chances of warping are very small with EasyPrint PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.


EasyPrint PLA sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick.

  • Full weight!
    On every spool of EasyPrint you will have a perfect spooled filament with a weight of 1 kg or 3 kg depending on what your needs are. When you compare price and performance EasyPrint is hard to beat!

  • Wide Temperature span
    Thanks to the high quality and lack of additives you can print this filament in a very wide temperature range. Recommended temp is 185° – 220°

  • Perfect diameter tolerance
    EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.02 mm and continuous roundness. The filament is controlled during the whole manufacturing process to assure that you will receive a perfect spool of filament each time you order. This will improve your prints and will also not cause any clogging

  • Continuously monitored
    During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.02 mm

  • Perfect spooling
    When you first lay your eyes on a spool of EasyPrint you will notice the perfect spooling. Each layer is perfectly spooled with no overlaps or crossing of the previous layer. This ensures that the material will be tangle free and will not cause you any trouble even if you have very long prints planned.

  • Non-toxic and biodegradable
    EasyPrint is made from 100% pure virgin PLA pellets. You can even compost it if you would like to. Thanks to the pure material EasyPrint meets the demand of a modern environmental safe PLA and is REACH and RoHS compliant. There is no additives in EasyPrint which is one of the reasons for the extreme ease of use.

  • Length indicator on spool
    Every spool of EasyPrint has a very smart length indicator on it. This makes it much easier for you to keep track on how much filament that is left on the spool.

  • EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or glue stick. There´s no need for a heated plate but if you have it we recommend a setting of 40°- 60°

  • EasyPrint comes on a clear spool that is vacuum sealed with desiccant to maintain low levels of moisture content.

  • EasyPrint is available in different diameters, weights and comes in many vibrant, beautiful colors, both solid and transparent.


Technical data


Test method




1.25 g/cm3

Melting Point


175 - 179° C

Glass transition temperature


60 - 62° C


Tensile strenght @ Yield


63 MPa

Elongation @ Break


6 %

Flexural Strenght


92 MPa

Izod Impact Strenght


3,5 KJ/m2

Filamentstørrelse 1,75mm
Vanskelighetsgrad Enkel

Kommentarer 1

  • Kjempe bra

    Omtale av

    Veldig fornøyd, men knekker litt enkelt. Ble fortalt at det skal fikses ved neste batch, ellers alt bra

Produktets tagger

Det er ikke registrert noen tagger.

Mine tagger

Andre kunder har også kjøpt