Nyhet
1,75mm PEI Ultem 9085 500g Natural

1,75mm PEI Ultem 9085 500g Natural

1.690,00 NOK

(inkl. mva.)

Ingen produktomtale

Produsent

PrimaCreator

Materiale

PEI Ultem 9085

Diameter

1.75 mm

Vekt Filament 500g

Toleranse

± 0.05 mm

Oppvarmet plattform

120-160ºc

Printetemperatur

355°C - 390°C

Hastighet 15-30mm/s
Spolestørrelse 750g 200mm x 55mm
Spole Senterdiameter 53mm
Modell/varenr.: 191-0-FP90
Lagerstatus: Bestillingsvare
stk.

SELECT Polyether Imide (PEI) Ultem 9085 is an amorphous, high performance thermoplastics with a glass transition temperature (Tg) of 186 °C. This material features superior mechanical performance, flame retardancy (UL 94-VO rated) and strength-to-weight ratio.

The PrimaCreator PEI Filament has unique properties because it does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the PrimaCreator PEI Filament particularly suitable for usage in FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.

To make a successful PEI print there are a few things to keep in mind. The printer must have the performance to meet the PEI filament and it should be printed with a nozzle temperature of 355-390°C. The heat bed should be set to 120-160°C and a heated chamber is important to have. It´s also very important to make sure that the printer is placed in a room where there´s hardly any draft and temperature fluctuations.

PEEK is best printed on a PEI sheet at a printing speed of 15-30 mm/s.

Filamentstørrelse 1,75mm
Vanskelighetsgrad Enkel
Tittel Type Størrelse Last ned
Material_safety_data_sheet_Ultem_9085_2019.pdf PDF 557.00KB Last ned
TDS-PEI-Ultem-9085-2019.pdf PDF 1.55MB Last ned

Kommentarer 0


Produktets tagger

Det er ikke registrert noen tagger.

Mine tagger